The Cadmium Detection Kit (Rapid – Lab) is a cadmium rapid test for laboratory screening of water samples for cadmium at 5 ppb. The kit contains 10 lateral flow cassettes, used in pairs so each sample is read beside a negative control, with results in 15 to 30 minutes.
This lab version (catalog AU2030-01) contains the cassettes, Sample Dilution Buffer and Negative Control only. It is intended for technical users who pipette samples with their own equipment, which keeps the cost per test lower for batch screening.
Key Features
- Screening level: a lighter test line indicates cadmium at 5 ppb or higher; no test line indicates 50 ppb or higher.
- Short run time: incubate 15 to 30 minutes, then read.
- Ready-to-use negative control: pipetted directly onto its own cassette for each sample.
- Simple lab workflow: 150 µL of sample into a pre-filled buffer tube, mix, and apply to the cassette.
- Semi-quantitative option: run cadmium standards alongside samples to estimate concentration in the 0 to 20 ppb range.
- Reader compatible: a lateral flow reader can produce numerical readings from the visual result.
- Room-temperature storage: store at 2 to 30 °C, with cassettes sealed until use.
What’s in the Kit
Each cadmium rapid test kit includes:
- 10 cadmium test cassettes, each in a foil pouch with desiccant
- 5 Sample Dilution Buffer tubes
- 5 Negative Control tubes
- Instruction manual
You will also need: a timer, transfer pipettes and sample collection bottles. A centrifuge is also needed for the quick spin of each buffer tube that the manual calls for. Cadmium solutions of known concentration are optional for positive controls or concentration estimates. This page also offers 5-test and 20-test sizes.
Who It’s For
This cadmium rapid test suits environmental, research and contract testing laboratories that screen water samples in batches and want a quick triage step before instrumental analysis. Users should be comfortable with pipetting and standard lab handling.
For testing at the sampling site without lab equipment, choose the Cadmium Detection Kit (Rapid – Field Use), which adds sample bottles and disposable pipettes. For quantitative measurement, use the Cadmium Ion ELISA Kit.
How to Use the Cadmium Rapid Test
Collect samples in a clean bottle and refrigerate for up to 5 days, or freeze them if they must be held longer. Let cassettes, buffer and samples reach room temperature before testing.
- Open two sealed cassettes for each sample: one for the sample and one for the negative control.
- Each Sample Dilution Buffer tube holds 15 µL of buffer. Spin the tube briefly so the buffer is at the bottom.
- Sample: pipette 150 µL of sample into the buffer tube and mix by pipetting up and down 3 times. Add the buffered sample to the sample port of the first cassette.
- Negative control: pipette 150 µL of Negative Control directly into the sample port of the second cassette.
- Immediately after both steps, incubate for 15 to 30 minutes, then read both cassettes side by side.
See the Cadmium Lateral Flow Rapid Lab Use Manual (AU2030-01) for full instructions.
Reading and Confirming Results
A visible control line is required for a valid result. Compare the sample test line with the negative control test line:
- Below the detection limit: the sample test line is as dark as, or darker than, the control test line.
- 5 ppb or higher: the sample test line is lighter than the control test line.
- 50 ppb or higher: no test line; only the control line is visible.
Read within the stated window, because line intensity changes as the strip dries, and do not compare against strips run earlier. Positive samples can be confirmed by conventional methods such as instrumental analysis.
Frequently Asked Questions
What is the detection limit of the cadmium rapid test?
The test screens water for cadmium at 5 ppb. A missing test line indicates about 50 ppb or more.
How long is the run time?
Incubate the cassettes for 15 to 30 minutes after applying the sample and negative control, then read.
Can I get a concentration value?
The cadmium rapid test is qualitative. For approximate values from 0 to 20 ppb, run cadmium standards with your samples. For quantitative results, use instrumental analysis or the Cadmium Ion ELISA Kit.
Which sample types are supported?
The manual’s intended use is water samples. Contact Attogene before testing other matrices.
Why are pipettes not included?
The lab kit assumes you have your own pipettes and sample containers. The field kit includes them.
Lab kits are also available for lead and mercury.
For research use only. Not for use in diagnostic procedures. Questions? Call 512-333-1330 or email sales@attogene.com.











