The Mercury Detection Kit (Rapid – Field Use) is a mercury test kit that screens water for mercury ions (Hg2+) at 10 ppb (10 µg/L) and above. Each kit tests 5 samples using 10 single-use cassettes, one for each sample and one for its negative control, with results read at 15 minutes by eye or with a lateral flow reader.
This field version (catalog AU2029) includes the water sample bottles and fixed-volume 200 µL transfer pipettes needed to collect and test samples on site. No pipettor or power is required.
Key Features
- Screening level: mercury ions at 10 ppb and above; a very faint or absent test line indicates about 100 ppb or more.
- Results in 15 minutes: read each cassette 15 minutes after the liquid is added.
- Paired negative control: every sample is read against its own negative control cassette.
- Field-ready: sample bottles and fixed-volume pipettes are included; no pipettor, centrifuge or power needed.
- Visual or numerical results: read by eye, or calculate test-to-control (T/C) ratios with a lateral flow reader.
- Flexible storage: all components at room temperature, or at 2 to 8 °C.
What’s in the Kit
Each mercury test kit includes:
- 10 mercury cassettes, each in a foil pouch with desiccant
- 10 tubes of 10X Sample Dilution Buffer (22 µL per tube)
- 5 tubes of Ultrapure Water for the negative controls (200 µL per tube)
- 10 fixed-volume transfer pipettes, 200 µL
- 5 water sample bottles, 125 mL HDPE
- Instruction manual
You will also need: a timer, disposable gloves and a permanent marker. A mercury standard of known concentration is optional, as a positive control or to estimate concentration. Extra Sample Dilution Buffer is available in packs of 5 or 10, and this page also offers 5-test and 20-test sizes.
Who It’s For
This field mercury test kit is built for environmental field teams, researchers sampling streams, ponds, wells or industrial discharge, and anyone who needs a quick screening answer at the sampling site. The fixed-volume pipettes measure the sample without lab equipment or pipetting experience.
Labs that already own pipettors can use the Mercury Detection Kit (Rapid – Lab), which has the same cassettes without the field supplies. For quantitative confirmation, use the Mercury Ion ELISA Kit.
How to Use the Mercury Test Kit
Collect each sample in a Water Sample Bottle filled to the top and capped tightly. Test as soon as possible, ideally within a few hours, because mercury can be lost to the bottle walls and as vapor. If needed, keep samples capped at 2 to 8 °C in the dark and test within 24 hours. Do not add acid or preservatives. Bring all components and samples to room temperature first.
- Tap two buffer tubes so the buffer collects at the bottom. Lay two cassettes flat and label one NC and one with the sample name.
- Negative control: with a new transfer pipette, draw 200 µL of Ultrapure Water (a full stem) into a buffer tube and mix 3 times. Add 200 µL of the mix to the sample port of the NC cassette and start the timer.
- Sample: with a new pipette, draw 200 µL of the water sample into a new buffer tube and mix 3 times.
- Add 200 µL of the mix to the sample port of the sample cassette and note the time.
- Leave both cassettes flat and undisturbed, then read them side by side at 15 minutes.
Download the Mercury Lateral Flow Kit Field Use Manual (AU2029) for full instructions and troubleshooting.
How It Works and Reading Results
The test is a competitive immunoassay. Colloidal gold coated with a mouse monoclonal anti-mercury antibody binds a mercury-BSA test line. Mercury in the sample occupies the antibody, so less gold binds the test line: a weaker test line means more mercury. A goat anti-mouse IgG control line confirms the cassette ran correctly.
- Invalid: no control line on either cassette. Repeat with new cassettes.
- Negative: sample test line as dark as or darker than the negative control, below 10 ppb.
- Positive: sample test line visibly lighter than the negative control, 10 ppb or more.
- Strong positive: test line very faint or absent, about 100 ppb or more.
With a reader, a sample T/C at or below about half of the negative control T/C indicates 10 ppb or more.
Frequently Asked Questions
Does a negative result mean the water meets drinking-water standards?
No. The 10 ppb screening level is above the US EPA drinking-water limit for inorganic mercury of 2 ppb, so a negative result from the mercury test kit does not show compliance.
Can I test fish or other foods?
The mercury test kit has been evaluated with water only. Fish, food and other sample types have not been validated.
Does it detect methylmercury?
The test detects mercury ions (Hg2+). Organic mercury compounds such as methylmercury, and cross-reactivity with other metals, have not been evaluated.
How do I confirm a positive?
Confirm results by a conventional method such as cold-vapor atomic absorption or ICP-MS, or quantify them with the Mercury Ion ELISA Kit.
Why must I use the supplied Ultrapure Water?
Tap, bottled or distilled water can contain traces of metals and make the negative control read incorrectly.
Field kits are also available for lead and cadmium.
For research use only. Not for use in diagnostic procedures. Questions? Call 512-333-1330 or email sales@attogene.com.















