,

Protein A Colloidal Gold for Lateral Flow

$144.50

  • Functionally tested Protein A conjugated gold
  • Perfect for Lateral Flow Development and use in final product
  • 40nm gold particles conjugated to Protein A are offered in 10 OD 1mL size. If a different OD or amount is required please inquire: sales@attogene.com
- +

Protein A Colloidal Gold for Lateral Flow is Attogene’s ready-made Protein A colloidal gold: 40 nm gold particles conjugated to Protein A and supplied at 10 OD in a 1 mL size (catalog AU2016). It is functionally tested in lateral flow and suited to both lateral flow development and use in a final product.

Protein A binds the Fc region of IgG from many species, so a Protein A gold conjugate can act as a general antibody detection reagent without conjugating your own antibody first. Binding strength varies by species and IgG subclass, so confirm performance with your antibody. Attogene produces it in a state-of-the-art facility built for rapid turnaround and batch-to-batch consistency.

Key Features

  • Pre-conjugated: Protein A on 40 nm colloidal gold, ready to use in feasibility work.
  • Concentrated: supplied at 10 OD (10–11 OD specification).
  • Functionally tested on a lateral flow strip in a cassette (see below).
  • Controlled particle size: 40.0 ± 2.5 nm diameter, CV below 10%.
  • Development to production: suitable for prototype strips and final products, with larger quantities on request.

Specifications

Each Protein A colloidal gold order contains 1 mL at 10 OD. Specifications from the AU2016 spec sheet:

  • Conjugate: Protein A on 40 nm colloidal gold
  • Diameter: 40.0 ± 2.5 nm (standard deviation less than ±4.0 nm; CV less than 10%)
  • Optical density: 10–11
  • SPR peak: 523.5 nm ± 1 nm
  • Particle concentration: 5.2–7.3 × 10¹¹ per mL
  • Mass concentration (Au): 0.37–0.42 mg/mL
  • Molarity: 0.8–1.2 nM
  • pH: 7.0–8.5
  • Zeta potential: −50 ± 20 mV
  • Volume: 1 mL; other ODs and larger quantities on request
  • Storage: 2–8 °C, away from light. Do not freeze; freezing causes irreversible aggregation.

Who It’s For

  • Lateral flow developers who want a working gold detection reagent for early feasibility before making a custom conjugate.
  • Teams testing antibodies on strips, where Protein A gold labels an IgG antibody that is then captured on the test line.
  • Manufacturers who need a consistent Protein A gold conjugate for a final product.

How to Use Protein A Colloidal Gold in Your Assay

Guidance from the spec sheet and the functional test shown on this page:

  1. Redisperse. Bring to room temperature and shake well. If particles have settled, shake vigorously for 30 seconds and check that all product is redispersed. If particulates remain, sonicate for 1 minute, shake and repeat as needed; do not sonicate longer than 1 minute at a time.
  2. Dilute if needed in 22 mM boric acid, pH 8.5, with 0.1% BSA, the diluent the spec sheet suggests for best stability.
  3. Combine with your antibody. In Attogene’s functional test, the gold was incubated in lateral flow running buffer with a limiting amount of a monoclonal antibody.
  4. Run the strip. Apply the mixture to the sample port of a cassette containing your lateral flow strip and read the test and control lines.
  5. Include a negative. Run the gold in running buffer alone alongside your sample.

Download the Protein A gold spec sheet (AU2016) (PDF).

Functional Testing

The product image shows Protein A 40 nm gold tested in a lateral flow cassette. The strip carried a chemical–BSA conjugate on the test line and a goat anti-mouse antibody on the control line. The gold was incubated in running buffer either alone or with a limiting amount of a monoclonal antibody against the chemical–BSA conjugate, then applied to the sample port. The results demonstrate the specificity and robustness of the conjugate.

Attogene’s Gold Conjugation Technical Guide lists Protein A gold as a ready-made conjugate for feasibility work. When you are ready to make a dedicated conjugate, Attogene’s unconjugated gold is available as 10nm, 30nm, 40nm and 60nm Colloidal Gold. For biotinylated binders, see Streptavidin Colloidal Gold.

Frequently Asked Questions

What is Protein A colloidal gold used for?

It is a pre-made gold detection reagent that binds IgG antibodies. In lateral flow development it lets you label an antibody on the strip without conjugating that antibody to gold yourself.

What size and concentration is it?

40 nm gold conjugated to Protein A, supplied at 10 OD in 1 mL. For a different OD or amount, email sales@attogene.com.

How should I store it?

At 2–8 °C, away from light. Never freeze it.

What if I see particulates or a color change?

That can indicate aggregation. The spec sheet suggests filtering through a 0.45 µm PVDF filter, keeping the filtrate, and checking quality by spectrophotometry and electron microscopy.

Can Attogene help build an assay around it?

Yes. Attogene’s lateral flow services cover feasibility, antibody pair screening, gold conjugation, prototyping and scale-up. For nucleic acid dipstick work with your own detection particles, see the Universal Lateral Flow Assay Kit (Particles Not Included).

For research use only. Not for use in diagnostic procedures. Questions? Call 512-333-1330 or email sales@attogene.com.

Select Volume

10mL of 10OD, 100mL of 10OD

You may also like…

Shopping Cart